Oxy-fuel combustion of heavy oil based on OH - PLIF technique

Oxy-fuel combustion of heavy oil can be applied to oil field steam injection boilers, allowing the utilization of both heavy oil and CO₂ resources. This paper studied the local distribution characteristics of OH on oxy-fuel combustion of heavy oil during the ignition and stable combustion processes. During the ignition process, we observed the generation and evolution of fire kernel, and got the flame propagation velocity. During the stable combustion process, the results showed that the OH distribution and its relative signal intensity were influenced by the oxygen concentration, excess air coefficient, gas flow, reaction atmosphere, oil mist scattering, incident laser energy and laser sheet position. In the same reaction atmosphere, the ranges of OH dense distribution and the high temperature area increased as O₂ concentration increased. In the same O₂ concentration, both the ranges of OH dense distribution and the high temperature area in O₂/N₂ were larger than that in O₂/CO₂. In 29% O₂/71% CO₂, the flame shape was similar to combust in air, while the OH relative signal intensity and its volatility were much larger than that in air. In the same combustion condition, the location of high concentration of OH relative concentration field lagged behind the high temperature area. The results further reveal the differences between the conventional and oxy-fuel combustion.     

降雨强度对植被过滤带中胶体迁移过程的影响

通过人工降雨条件下胶体在10 m长度植被过滤带中的运移试验，建立耦合降雨的胶体迁移模型，以探究降雨强度对植被过滤带中胶体运移过程的影响。结果表明:不同降雨强度下，胶体在植被过滤带中的沉积吸附效率系数随运移距离呈幂指数下降趋势，并在6 m左右趋于稳定；随着降雨强度的增大，胶体在植被过滤带中的沉积吸附效率系数增大，在较大降雨强度下的去除效果更好。     

Investigations on Emission Characteristics of a Liquid-Fueled Trapped Vortex Combustor

The combustion and emission formation process of liquid fuel in the trapped vortex combustor(TVC)are very complicated.A trapped vortex combustor with replaceable bluff-bodies was designed to investigate these processes.The bluff-body widths varied from 0.021 m to 0.036 m.Experimental tests were carried out.Liquid RP-3 aviation kerosene was used in the tests.Emissions were measured under atmospheric pressure.The combustion process was analyzed theoretically in the viewpoints of relative evaporation time,mixing time and reaction time.Numerical simulations were also conducted to help analyze the formation and depletion processes of pollutants in TVC.The results reveal that atomization was a critical factor for formation and depletion processes of pollutants.By controlling mixing speed of burned and unburned gases and thus fuel-air uniformity,turbulence intensity could also affect emission levels.In addition,residence time also affected the emissions by affecting combustion completeness and the time for NOx formation.All these factors were combined in a complicated way to affect combustion process and pollutant emissions.     

Flow visualization and transient behavior analysis of luminescent mini-tufts after a backward-facing step

Luminescent mini-tufts method has been used for surface flow visualization for a long time. One major challenging point of this method is quantitative analysis of transient flows and the dynamic structures. This study is focused on the application of luminescent mini-tufts method in transient flows. A backward-facing step (BFS) is used in this analysis, which is one classic model that consists both flow separation and re-attachment processes. In this study, the instantaneous mini-tufts recognition, image averaging and tuft inclination angle/tuft angle estimation processes are introduced for the analysis of luminescent mini-tufts for the first time on backward-facing step flow (Re_m = 2.0 × 10⁵–7.9 × 10⁵ and Re_h = 1.3 × 10⁴–5.3 × 10⁴). Detailed transient features and characterization process for the backward-facing step model are explained in this study. The combination of optical-oil flow and hot-wire anemometry methods with luminescent mini-tufts are also shown useful to give comprehensive flow field information, including the surface flow behaviors, boundary layer, re-attachment position identification, etc. In addition, the decomposition of the luminescent mini-tufts visualization data is also conducted to give the power spectral density (PSD) and characteristic frequencies for the mini-tufts behaviors under transient fluctuating flow conditions.     

高压并联电抗器噪声影响因素及其控制措施研究

文中针对变电站高压并联电抗器噪声对环境的影响问题及其控制要求,通过实验研究了高压并联电抗器噪声的影响因素及其控制措施。文中采用改进声强法实测了湖北省内15座变电站37组共111台500 kV高压并联电抗器声功率级,并对其进行了分析。测试结果表明,随着运行年限的增加,电抗器最大声功率级逐步增大。由于设备额定容量与额定电压的提高,使用新的绝缘材料和设计方案后,在一定程度上会起到减震降噪作用。同时,电抗器采用散热片四周布置方式,也能实现对噪声的控制。针对高压电抗器的噪声控制,文中从声源控制、传播过程控制角度,提出相应的控制措施。其中,声源主要通过改善材料和设计进行控制。以某500 kV变电站的降噪处理为例,利用SoundPLAN噪声分析软件,提出了隔声屏障控制方案,使噪声平均声压级降低约6 dB(A),从而满足噪声控制的要求。文中的研究内容对于指导变电站的设计及降噪处理具有重要意义。     

放射性物品运输容器防脆性断裂安全设计方法探讨

本文主要介绍了基于断裂力学的运输容器防脆性断裂安全设计,重点研究了防脆断条件中应力强度因子的计算方法。经分析,可以得出如下结论:RCC-M第Ⅰ卷附录ZG中的应力强度因子计算考虑了应力非线性分布和塑性区的影响,考虑因素比较全面,推荐采用。     

某微细粒嵌布磁铁矿选矿工艺研究

针对某微细粒磁铁矿进行了全磁选流程和磁选-反浮选流程对比试验研究。结果表明,在最终磨矿细度相当的情况下,2种工艺流程都获得了产率48%左右、TFe品位66%左右、回收率80%左右的铁精矿指标,而采用磁选-反浮选流程的第三段磨矿量比全磁选流程减少了2/3。磁选-反浮选流程具有显著的节能降耗优势。     

The composite impact of ICT industry on lowering carbon intensity: From the perspective of regional heterogeneity

The balance between low carbon development and rapid economic growth is a ‘Gordian knot’ for most countries. This study aims to explore the practicable route of lowering carbon intensity with the expansion of the Information and Communication Technologies (ICT) industry in China. Using the provincial panel data from 2000 to 2017, the paper employs five indicators to empirically investigate the determinant mechanism of carbon intensity based on the refined Stochastic Impact by Regression on Population, Affluence, and Technology (STIRPAT) and spatial econometric models. The findings demonstrate that the ICT industry is the main force in adjusting carbon intensity. Despite constraint by the rebound effect, the net effect of the ICT industry shows a significant positive impact on lowering carbon intensity under the consideration of spatial dependence. Furthermore, compared with developed regions, the contribution of ICT on regional inequality of carbon intensity shows a higher share in developing regions. By applying the Oaxaca-Ransom counterfactual decomposition, the results reveal that there are substantial regional gaps between multi-comparable groups. The composite effect of informatization, industrialization, and urbanization accounts for the major share of the regional gap. Thus, policymakers should pay more attention to enhancing the ICT infrastructure in developing regions, boosting the ICT-related technology investment in specific sectors, coordinating regional cooperation, and balancing the migration of skilled workers.     

某型柴油机水泵、机油泵间隙调整工装的应用

为了方便某柴油机前端水泵和机油泵齿轮间隙的调整,改变以前传统的调整方法,通过长期在装配现场的观察和了解,设计出某柴油机前端水泵和机油泵齿轮间调整工作,经现场使用验证;该工装安全、小巧轻便精度高,改善了装配的劳动强度和装配质量。     

A novel and sensitive colorimetric detection of PABA by asymmetrically functionalized TA-AuNPs-PEG-FITC based on oriented aggregation

A colorimetric assay based on the oriented TA-AuNPs-PEG-FITC for rapid and sensitive PABA detection was proposed. Initially, the negatively charged TA modified on the surface of AuNPs enabled rapid binding to PABA due to the electrostatic interaction and hydrogen bond, resulting in a visible color change. However, particles were aggregated in a non-oriented way, leading to an unstable testing system which failed to realize the accurate quantification. Thus, the asymmetrically functionalized TA-AuNPs-PEG-FITC were prepared, in which the stabilizer agent of HS-PEG-FITC was attached to the specific sites on the surface of TA-AuNPs. Such a way of modification resulted in an oriented aggregation manner, the addition of PABA induced the formation of oligomers. Moreover, the introduction of FITC group acted as fluorescent marker, providing a simple, fast and quantitative method for characterization of PEG chain. The molar ratio between TA-AuNPs and modified PEG-FITC was further determined. A linear regression was established in a wide range from 10 μM to 1 mM with the LOD of 6.9 μM. Finally, the sensor was successfully applied in the health food. This was the first example in which TA-AuNPs-PEG-FITC were fabricated for colorimetric detection of PABA, and an indirect method based on fluorescence marker was well used to quantify the content of PEG chain.